The AP230 provides high-performance aggregate data rates up to 1300 Mbps in 5-GHz band. It supports dual concurrent 2.4Ghz 802.11n/g/b with Turbo-QAM™ and 5Ghz 802.11ac/n/a radios which can support legacy 802.11a, b, g and n clients and interoperate with the rest of the Aerohive Cooperative Control devices to provide a seamless enterprise-class experience for all connected users.
Radio Specifications—802.11a
-
5.150–5.950 GHz Operating Frequency
-
Orthogonal Frequency Division Multiplexing (OFDM) Modulation
-
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
Radio Specifications—802.11b
-
2.4–2.5GHz Operating Frequency
-
Direct-Sequence Spread-Spectrum (DSSS) Modulation
-
Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
Radio Specifications—802.11g
-
2.4–2.5 GHz Operating Frequency
-
Orthogonal Frequency Division Multiplexing (OFDM) Modulation
-
20 dBm (100 mW) Transmit Power
-
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
Radio Specifications—802.11n
-
2.4–2.5 GHz & 5.150–5.950 GHz Operating Frequency
-
802.11n Modulation
-
Rates (Mbps): MCS0–MCS23 (6.5Mbps - 450Mbps)
-
3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
-
HT20 (both 2.4GHz and HT40 High-Throughput (HT) Support)
-
A-MPDU and A-MSDU Frame Aggregation
Radio Specifications—802.11ac
-
5.150–5.950 GHz Operating Frequency
-
802.11ac Modulation (256-QAM)
-
Rates (Mbps): MCS0–MCS9 (6.5Mbps - 1300Mbps), NSS = 1-3.
-
3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
-
VHT20/VHT40/VHT80 support
Mounting
-
Desktop
-
Wall Mount included as part of AP
-
Built-in slot for Kensington type locks
-
Ceiling and Wall Mount locking accessory included with AP
-
Ceiling Tile flush 15/16” included as part of AP
-
Ceiling Tile Recessed 15/16”, 3/8”, 9/16” sold as an accessory
-
Ceiling Tile flush 3/8”, 9/16” sold as an accessory
-
Suspend Mount sold as an accessory
-
Plenum Mount sold as an accessory
Antennas
-
3x Integrated single band, 2.4-2.5 GHz Omni-directional antennas, 6.0 dBi peak gain
-
3x Integrated single band, 5.1-5.8 GHz Omni-directional antennas, 6.0 dBi peak gain
Interfaces
-
2x autosensing 10/100/1000 Base-T Ethernet Ports
-
Dual Ethernet ports with backhaul capabilities
-
Link Aggregation supported via Ether channel (link aggregation)
-
1x Serial RJ45 port (bits per second: 9600, data bits: 8, parity: none, stop bits: 1, flow control: none)
-
USB 2.0 port
-
1x Reset Pinhole
Physical
-
WxHxD: 7.25” x 7.25” by 1 7/8” tall (plus .25” for the mounting hardware) – so 2.12” (5.4 cm) high total
-
Weight: 1.6 lbs (.73 kilograms)
Environmental
-
Operating: 0 to 40°C, Storage: -40 to +70°C, Humidity: 95% Environmental Compliance
-
UL 2043
Power Options (sold separately)
-
802.3af (minimum required) and/or 802.3at Power over Ethernet PoE Injector
-
12v DC external power adapter
-
Aerohive switch products
Power Specification
-
AC/DC power adapter: – Input: 100–240 VAC – Output: 12v/2.0A
-
PoE nominal input voltages: 48V, 0.35A, (802.3af) – 48V, 0.625A (802.3at)
-
RJ-45 power input pins: Wires 4,5,7,8 or 1,2,3,6