Oppimisen teknologian verkkokauppa 0207 191 510 kauppa@ilonait.fi
Ostoskorisi on tyhjä

D-LINK K/Wireless Controller+DWL-8610AP

Etusivu / Muut / Verkko / Langattomat / D-LINK K/Wireless Controller+DWL-8610AP
D-LINK K/ Wireless Controller+DWL-8610AP (DWC-1000-BUNDLE-DWL-8610AP)

D-LINK K/Wireless Controller+DWL-8610AP

  • Nopeus 1.75Gbps
  • Tyyppi Wireless Kit


The D-Link DWC-1000 Wireless Controller is a centralized wireless LAN manager developed specifically for campuses, branch offices, and small-to-medium enterprises (SMBs). With the ability to manage up to six wireless access points (upgradable to 24) and a maximum of 96 wireless access points in a Controller Cluster, the DWC-1000 is a cost-effective mobility solution for small to medium-scale environments. Its auto-managed AP discovery and single point management allow customers to acquire an enterprise class system without the burden of executing massive and complex configurations. With a robust and comprehensive security detection system, the DWC-1000 also enables managed APs to
block potential attacks from unauthorized users and devices, especially for wireless environments.

Robust and Optimized Network
The DWC-1000 features a self-organizing, self- optimizing, and self-healing network capability to increase the stability of the entire wireless network. With regular-based radio scanning and performance analyzing, the DWC-1000 automatically adjusts radio channels and power periodically to avoid interference and keep the wireless network in an optimized state. To make up for a sudden RF signal vacuum created by any “dead” access point, the DWC-1000 will increase the transmit output power of neighboring access points to expand RF coverage.

Comprehensive Security
The DWC-1000 provides a comprehensive wireless security solution for any network. On the wireless side, empowered by a Wireless Instruction Detection System (WIDS), the DWC-1000 detects rogue access points and rogue clients as well as anticipates wireless threats, preventing any potential damage and illegal access. In addition to other fundamental
wireless security features including WEP, WPA Personal/Enterprise, WPA2 Personal/Enterprise, and MAC Authentication to determine the identity of wireless devices, the Captive Portal feature allows you to block clients from accessing the network until the clients verify their identities. This double-layer authentication and authorization provides a robust
security fence to also protect against attacks from within the network.

High Scalability, Availability, and Flexibility
Many companies are frequently changing in terms of size and organizational structure. To address such changing needs, the DWC-1000 offers a new dimension in feature selections: administrators can purchase a Business Wireless Plus license to upgrade the DWC-1000’s capabilities. D-Link offers two types of Business Wireless Plus licenses: an AP license upgrade and a VPN license upgrade.
The AP license upgrade increases the number of manageable access points. The DWC-1000 Wireless Controller manages up to six access points by default and after AP license upgrading, can manage up to 24 access points per controller.
The VPN license upgrade enables the DWC-1000 to provide VPN, Router, and Firewall functionality. The firewall function allows administrators to control network access by setting classification policies. The dual Option ports provide link failover and provide Internet connection redundancy to ensure Internet access. The virtual private network (VPN) features provide secure remote control to manage access points in branch offices. Site-to-site VPN tunnels use IP Security (IPSec) Protocol, Point-to-Point Tunneling Protocol (PPTP), or Layer 2 Tunneling Protocol (L2TP) to facilitate branch office connectivity through encrypted virtual links. In addition, the Secure Sockets Layer (SSL) VPN tunnels empower your mobile users by providing remote access to a central corporate database.

Simplified Management
Centralized remote control of managed access points provide a simple way to automatically discover compatible D-Link Wireless Access Points, add them into the managed access point list, and configure them with one-time configuration dispatch settings. With the controller clustering feature, the administrator can easily log into one wireless controller and perform essential configurations on others within the group. The real-time monitoring of access points and associated client stations enable the efficient utilization of network resources. System alarms and statistics reports on managed access points also help the administrator to use the DWC-1000 to manage, control, and optimize network performance.


• Ethernet: 
  2 10/100/1000 option ports*
  4 10/100/1000 LAN ports
• USB: 2 USB 2.0 ports
• Console: RJ-45
Capacity and Performance
• Maximum Access Points per unit (default/upgrade): 6/24**
• Maximum Access Points per cluster (default/upgrade): 24/96**
• Concurrent Captive Portal authentication users (Wired/ Wireless): 124/ 400
• Dedicated IPSec VPN tunnels***: 70
• Dedicated PPTP/L2TP VPN tunnels***: 25
• Dedicated SSL VPN tunnels***: 20
Access Point Management
• Compatible Managed APs: DWL-8600AP, DWL-6600AP, DWL-3600AP
• AP Discovery & Control: Layer-2, Layer-3
• AP Monitoring:
  Managed AP
  Rogue AP
  Authentication Fail AP
  Standalone AP
• Client Monitoring:
  Authenticated Client
  Rogue Client
  Authentication Fail Client
  Ad-hoc Client
• Supports Centralized RF/Security Policy Management
• Fast Roaming
• Intra-controller/Inter-controller roaming
• Intra-subnet/Inter-subnet roaming
• Wireless Security:
  Dynamic WEP
  WPA Personal/Enterprise
  WPA2 Personal/Enterprise
• Wireless Instruction Detection & Prevention System (WIDS):
  Rogue and Valid AP Classification
  Rogue AP Mitigation
• LAN Security: 802.1x port-based access control and guest VLAN
• Authentication:
  Captive Portal
  MAC Authentication
• VLAN Group: up to 255 entries
• 802.1q VLAN Tagging
• Subnet-based VLAN
• Port-based VLAN
Firewall System***
• Policy:
  Each feature supports 100 rules
  Supports up to 600 firewall rules
• Dynamic Route: RIPv1, RIPv2
• Dynamic DNS
• Web Content Filtering:
  Static URL
• Route Failover
• Outbound Load Balancing
Virtual Private Network (VPN)***
• Encryption Methods: DES, 3DES, AES, Twofish, Blowfish, CAST-128, NULL
• IPSec NAT Traversal
• Dead Peer Detection
• IP Encapsulating Security Payload (ESP)
• IP Authentication Header (AH)
• VPN Tunnel Keep Alive
• Hub and Spoke
SSL Virtual Private Network (SSL VPN)***
• SSL Encryption Methods: DES, 3DES, AES
• SSL Message Integrity: MD5, SHA1
System Management
• Web-based User Interface: HTTP
• Command Line Interface
• SNMP: v1, v2c, v3

Physical & Enviromental
Power Supply
• Internal power supply: DC 12V/2.5A
Max. Power Consumption
• 19.3W
• 180 x 280 x 44mm
Operation Temperature
• 0 to 40°C
Storage Temperature
• -20 to 70°C
Operation Humidity
• 5% to 95%, Non-condensing
• FCC Class B, CE Class B, VCCI, C-tick, IC
• cUL, LVD (EN60950-1)

Unified Wireless AC1750 Dual-Band Access Point


Performance without Compromise
Incorporating the latest leading Wireless AC Chipset, the DWL-8610AP delivers a maximum wireless speed of 1750Mbps, up to 4x the performance of Wireless N*.

Broadcast on 32 SSIDs Simultaneously
Supports up to 32 SSIDs, 16 per radio, including station isolation

Smart Design
The DWL-8610AP can be mounted easily onto any wall or ceiling. Designed with standard Power over Ethernet requirements, the DWL-8610AP can easily be deployed and connected to any network and configured centrally.

Managed using Wireless Controller or Unified Wireless SwitchAll D-Link’s Unified Wireless Access Point can be managed using D-Link’s Wireless Controller or Unified Switch.

Simultaneous Dual-Band WirelessSupports up to 1300 Mbps 3x3 MIMO for the 5Ghz band and up to 450Mbps 3x3 MIMO for the 2.4Ghz band

Secure and Green Design
The DWL-8610AP has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.

Band Steering Offered as Standard
With band steering, the DWL-8610AP detects whether or not the wireless client is dual-band capable, and if so, it pushes the client to connect to the less congested 5 Ghz band. It does this by actively blocking the client’s attempts to associate with the 2.4 Ghz network.

Versatility built as StandardWhether you intend to use a single Access Point or roll out a large corporate network, the DWL-8610AP coupled with D-Link's Wireless Controller or Switch makes managing your wireless network simple.


High-performance Connectivity

  • IEEE 802.11ac wireless1
  • Up to 1300+450 Mbps1
  • 2 x Gigabit LAN ports

Made for Business-class Environments

  • Simultaneous dual-band connectivity for increased network capacity
  • AC SmartBeam™ technology
  • Bandsteering for efficient traffic management
  • Console port for debugging

Flexible & Scalable

  • Flexible deployment, stand-alone or centrally managed by a wireless controller
  • Self-configuring cluster enables easier provisioning. Up to 16 DWL-8610APs may form a self-configuring cluster

Trusted Security

  • WPA/WPA2 Personal
  • WPA/WPA2 Enterprise
  • MAC address filtering
  • Rogue AP detection

Convenient Installation

  • Can be easily mounted on a wall or ceiling
  • 802.3at Power Over Ethernet (PoE) enables installation in hard-to-reach locations
  • UL2043 certified Plenum rated housing to comply with fire regulations




Device Interface

  • 802.11ac/b/g/n
  • RJ45 console port
  • 2 Gigabit LAN Port (one port supporting 802.3at PoE)


  • Power
  • LAN 1
  • LAN 2
  • Diagnostics
  • 2.4 GHz
  • 5 GHz

Wireless Frequency

  • 2.4 GHz band: 2.4 GHz-2.4835 GHz
  • 5 GHz band: 4.9 GHz-5.85 GHz

Data Transfer Rate

  • 802.11ac: 433 Mbps-1300 Mbps
  • 802.11n: 6.5 Mbps-450 Mbps
  • 802.11g: 54, 48, 36, 24, 12, 9, and 6 Mbps
  • 802.11b: 11, 5.5, 2, and 1 Mbps

Operation Channel

  • 2.4 GHz: 13 channels
  • 5 GHz: 19 non-overlapping channels


  • Internal omni-directional antennas
  • 6.5 dBi for 5 GHz, 5 dBi or 2.4 GHz



  • WPA-Personal/Enterprise
  • WPA2-Personal/Enterprise
  • WEP 64/128-bit encryption
  • SSID broadcast disable
  • MAC address access control
  • Internal RADIUS server

Network Management

  • Operational modes
    • Standalone
    • AP Array
    • Managed (with DWC-1000, DWS-4026 or DWS-3160)
  • Web-based user interface (HTTP/HTTPS)
  • Command line interface via
    • RJ45 serial console
  • Telnet/SSH
  • SNMP



  • 198 x 171 x 40 mm       


  • 240 grams (0.53 lbs)     

Power Adapter

  • Input: 100 to 240 V AC
  • Output: 12 V DC, 1 A

Power over Ethernet

  • 802.3at PoE+       


  • Bottom cover – metal
  • Top cover – plastic
  • UL2043 certified


  • Operating: 0 to 40 °C (32 to 104 °F)
  • Non-operating Temperature -20~65°C


  • Operating: 10% to 90% non-condensing    


  • CE
  • FCC
  • IC
  • cUL
  • LVD
  • UL2043
  • C-Tick
  • VCCI
  • NCC
  • Wi-Fi
  • EN 60601-1-2 

1. 1300 Mbps is the maximum wireless signal rate as specified by IEEE 802.11ac standard. Actual data throughput will vary. Network and other environmental factors, including volume of network traffic, building materials, and nearby radio interference may lower actual data throughput.
2. This feature is available when Unified AP is used in conjunction with D-Link’s line of Unified Switches and Wireless Controllers.

Teemme kaiken varmistaaksemme, että tämä sivusto sisältää vain virheetöntä ja oikeaa tietoa. Tuotevalikoiman muuttuessa ja kasvaessa jatkuvasti, emme kuitenkaan voi taata tietojen oikeellisuutta ja täydellisyyttä. Tuotekuvat ovat suuntaa-antavia eivätkä välttämättä sisällä tuotteiden ominaisuuksien täydellistä kuvausta. Epäselvissä tilanteissa lähetä sähköpostia myyntiin ( kauppa@ilonait.fi ) tai etusivun viesti-työkalulla ennen tuotteen tilaamista.