Ole hyvä ja odota...
Tuote on lisätty ostoskoriin. Näytä ostoskorin sisältö
Oppimisen teknologian verkkokauppa www.ilonait.fi kauppa@ilonait.fi
Ostoskorisi on tyhjä

DELL M1000E BLADE ENCL FULL RPS & FANS

Etusivu Tietokoneet Palvelimet DELL M1000E BLADE ENCL FULL RPS & FANS
Tuotetta ei enää löydy tietokannastamme. Jos tarvitset apua korvaavan tuotteen löytämiseen, ota meihin yhteyttä.
DELL M1000E BLADE ENCL FULL RPS & FANS (PSM100BDC)

DELL M1000E BLADE ENCL FULL RPS & FANS

Tuotekoodi:
PSM100BDC
Ammattilaisten arvostelut: 10 arvostelua
  • Tyyppi Blade kotelointi
  • CPU-perhe -
  • CPU -
  • Max CPU 0
  • Max levyt 0
  • Max muisti 0GB
  • Malli Dell PowerEdge M-series
  • CTO / BTO Ei
Kuvaus

PowerEdge M1000e Blade Enclosure

Outstanding efficiency and performance per watt
Enhance data center efficiency with the shared power, cooling, networking and management infrastructure of the PowerEdge™ M1000e Blade Enclosure.

Enclosure I/O Modules

Up to 6 total blade I/O modules for 3 fully redundant fabrics that take advantage of a fully passive midplane that can scale up to 8.4Tbps with current technologies featuring 1/10Gb Ethernet to servers, 40Gb Ethernet to top-of-rack switches, Fibre channel 8Gb, and InfiniBand QDR/FDR10/FDR. Dell’s blade Ethernet devices also have FlexIO technology, providing on-demand uplink scalability and investment protection unrivaled in the blade server market.

Power

Up to six 3000W high-efficiency power supplies, six 2700W high-efficiency power supplies or up to six -48V DC 2700W power supplies.
Based on Dell’s Energy Smart technologies, the M1000e power supplies deliver greater levels of efficiency, even at low levels of utilization. Supported power supply configurations include:
• 3+3 and 2+2 (grid redundancy)
• 2+1, 3+1, 4+2, and 5+1 (power supply redundancy)
• 2+0 and 3+0 (non-redundant mode)
The M1000e chassis supports dynamic power supply engagement (DPSE) mode, which if enabled, puts lightly loaded power supplies into standby mode, driving up the utilization and the efficiency of the active supplies. Dell supports either 110–120V or 208–240V AC power supply input and supports a wide range of power distribution options. Dell recommends 208–240V AC for all production environments.

nds 208–240V AC for all production environments.
Chassis

  • Form Factor: 10U modular enclosure holds up to sixteen half-height blade servers
  • 44.0cm(17.3”)H x 44.7cm(17.6”)W x 75.4cm(29.7”)D

Weight:

  • Empty Chassis only – 98lbs (44.5kg)
  • Chassis w/ all rear modules (IOMs, PSUs, CMCs, KVM) - 176lbs (79.8kg)
  • Max Fully loaded w/ blades and rear modules - 394lbs (178.7kg)

Input Devices:

  • Front Control Panel with interactive Graphical LCD
  • Supports initial configuration wizard
  • Local server blade, enclosure, and module information and troubleshooting
  • Two USB Keyboard/Mouse connections and one Video connection (requires the optional Avocent iKVM switch
  • to enable these ports) for local front “crash cart” console connections that can be switched between blades

Teemme kaiken varmistaaksemme, että tämä sivusto sisältää vain virheetöntä ja oikeaa tietoa. Tuotevalikoiman muuttuessa ja kasvaessa jatkuvasti, emme kuitenkaan voi taata tietojen oikeellisuutta ja täydellisyyttä. Tuotekuvat ovat suuntaa-antavia eivätkä välttämättä sisällä tuotteiden ominaisuuksien täydellistä kuvausta. Epäselvissä tilanteissa lähetä sähköpostia myyntiin ( kauppa@ilonait.fi ) tai etusivun viesti-työkalulla ennen tuotteen tilaamista.