Ole hyvä ja odota...
Tuote on lisätty ostoskoriin. Näytä ostoskorin sisältö
Oppimisen teknologian verkkokauppa www.ilonait.fi kauppa@ilonait.fi
Ostoskorisi on tyhjä

MAKERBOT PLA - True Blue - Large Spool / 1.75mm / 1.8mm Filament [0,9kg]

Etusivu Tulostus 3D-tulostus MAKERBOT PLA - True Blue - Large Spool / 1.75mm / 1.8mm Filament [0,9kg]
Tuotetta ei enää löydy tietokannastamme. Jos tarvitset apua korvaavan tuotteen löytämiseen, ota meihin yhteyttä.
MAKERBOT PLA - True Blue - Large Spool / 1.75mm / 1.8mm Filament [0,9kg] (MP05776)

MAKERBOT PLA - True Blue - Large Spool / 1.75mm / 1.8mm Filament [0,9kg]

Tuotekoodi:
MP05776
EAN:
0817913011043
  • Tuote 3D-tarvikkeet
Kuvaus

Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you’re new to 3D printing, MakerBot PLA Filament is a good material to start with because it’s easy to use and performs well on most prints.

MakerBot PLA Filament adheres well to acrylic and to MakerBot Build Plate Tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.
Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.

Be sure your build plate is level, clean and oil-free before printing.

Teemme kaiken varmistaaksemme, että tämä sivusto sisältää vain virheetöntä ja oikeaa tietoa. Tuotevalikoiman muuttuessa ja kasvaessa jatkuvasti, emme kuitenkaan voi taata tietojen oikeellisuutta ja täydellisyyttä. Tuotekuvat ovat suuntaa-antavia eivätkä välttämättä sisällä tuotteiden ominaisuuksien täydellistä kuvausta. Epäselvissä tilanteissa lähetä sähköpostia myyntiin ( kauppa@ilonait.fi ) tai etusivun viesti-työkalulla ennen tuotteen tilaamista.