Raspberry.Pi

This kit has been created to partner the functionality of the Raspberry Pi 3 with an easy-to-use Raspberry Pi camera. This allows the kit to be used for time-lapse or slow motion photography, home security or wildlife monitoring. The case allows you to house a Raspberry Pi and HAT add-on board and the tripod features an adaptor to mount the camera.

Uusi Raspberry Pi 400 -sarja sisältää kaiken yhdessä täysin suljetussa pienikokoisessa yksikössä, mikä poistaa useiden komponenttien tarpeen ja tuottaa samalla 1,8 GHz: n kellotaajuuden, joka on korkeampi kuin muilla markkinoilla olevilla Raspberry Pi -levyillä. Ainoa mitä tarvitaan Raspberry Pi 400:n käytön aloittamiseen valmiina tietokoneena, on näyttö. Aloitussarja sisältää Raspberry Pi 400:n, ennalta ohjelmoidun SD-kortin, virtalähteen, hiiren, aloittelijan oppaan ja mikro-HDMI-kaapelin.

Raspberry Pi 4 -malli B on uusin lisäys suosittuun Raspberry Pi -tuoteperheeseen. Se tarjoaa huomattavan lisäyksen prosessorin nopeudelle, multimedian tehokkuudelle, muistille ja parennetuille liitännöille verrattuna edeltäjänsä Raspberry Pi 3 -malliin B+.

The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins. The Sense HAT has several integrated circuit based sensors that can be used for many different types of experiments, applications, and even games.

The Raspberry Pi Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras. The board itself is tiny, at around 25mm x 23mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short ribbon cable.

The Raspberry Pi NoIR Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSi interface, designed especially for interfacing to cameras. The board itself is tiny, at around 25mm x 23mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short ribbon cable. The high quality Sony sensor itself has a native resolution of 8 megapixel, and has a fixed focus lens on-board. In terms of still images, the camera is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

The MPC151525T is a 15x15x2.0mm low-profile, light-weight, flat Micro-Porous Ceramic Heat Sink (MPCHS). Due to its highly micro-porous nature it provides a very large surface area compared to conventional copper/aluminium heatsinks and therefore provides excellent heat dissipation without storing heat within its self. The MPCHS also has the lowest thermal capacity of unit volume compared to copper and aluminium heat sinks. Supplied with thermal Silicone adhesive tape.