YAMAHA RMCR - Adecia Signal Conference Processor
Tuotetta ei enää löydy tietokannastamme. Jos tarvitset apua korvaavan tuotteen löytämiseen, ota meihin yhteyttä.
|
YAMAHA RMCR - Adecia Signal Conference Processor
|
RM-CR
Remote Conference Processor
Features:
- Standard network audio support for "Dante"; all compatible devices can be connected with single network cable
- Automatically recognizes connected devices on the same network for audio routing
- Equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment
- Equipped with the Auto Mixer functions that automatically mix the audio of all connected microphones
- Equipped with various Input/Output connections such as USB, VoIP,, analog, and Bluetooth
Specifications:
- Dimensions W215 mm × D260 mm × H44 mm
- Weight 1.6 kg
- Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48 V
- Power consumption (max) 15.0 W
- Connector RJ 45, USB, XLR balanced, RCA
- In Operation Temperature 0~40 ℃
- Humidity 30 %~90 % (No condensation)
- Storage Temperature -20~60 ℃
- Humidity 20 %~90 % (No condensation)
- Indicator Power Indicator, Status Indicator, Bluetooth Indicator, Network Port Indicator (x3)
- Mount Table Mount, Rack Mount
- Maximum Device Number with RM-CR -
- Accessories Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel
- Options RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit
- Network Specifications
- Ether1 Dante Audio/Dante Control, Remote Control, WebUI, PoE+
- Ether2/Ether3 Corporate Network, Remote Control, SIP, WebUI
- USB USB2.0, Network Class, WebUI, Fixed IP
- Audio Specifications
- Audio I/O Dante 16in/16out
- USB USB2.0, Audio Class 1.0, Input: 2 ch, Output: 2 ch @48 kHz
- Mic Input XLR balanced, Input 2 ch
- AUX RCA unbalanced (Line Level), Input: 2 ch, Output: 2 ch
- Speaker Out RCA unbalanced (Line Level), Output: 2 ch
- Bluetooth Version Bluetooth 4.2
- Supported Profiles HFP (1.6), A2DP, AVRCP
- Supported Codec CVSD, SBC, mSBC
- Wireless Output Class2
- Maximum Communication Distance 10 m (32.8 ft) (no obstacles)
- Radio Frequency (Operational Frequency) 2,402 to 2,480 MHz
- Maximum Output Power (EIRP) 4.0 dBm (2.5 mW)
- SIP Call Handling Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured)
- Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user
- Codecs G.711, G.722HD, G.729ab, G.726
- DTMF Support RTP event, SIP in-band, SIP info package
- Security SRTP Support (RFC 1889), IETF SIP support(RFC 3261 and companion RFCs)
- Sampling Rate 48 kHz
- Bit Depth 24 bit
- Latency 8 [ms] (Dante In to USB Out, includes signal processing)
- Frequency Response 20 Hz – 20 kHz
Teemme kaiken varmistaaksemme, että tämä sivusto sisältää vain virheetöntä ja oikeaa tietoa. Tuotevalikoiman muuttuessa ja kasvaessa jatkuvasti, emme kuitenkaan voi taata tietojen oikeellisuutta ja täydellisyyttä. Tuotekuvat ovat suuntaa-antavia eivätkä välttämättä sisällä tuotteiden ominaisuuksien täydellistä kuvausta. Epäselvissä tilanteissa lähetä sähköpostia myyntiin ( kauppa@ilonait.fi ) tai etusivun viesti-työkalulla ennen tuotteen tilaamista.