Please wait...
The product was added to the shopping cart. View shopping cart
Cart is empty

YAMAHA RMCR - Adecia Signal Conference Processor

Frontpage Home/Leisure HI-FI/Stereo YAMAHA RMCR - Adecia Signal Conference Processor
This product is no longer in our database. Please contact us if you need help to find a replacement product.
YAMAHA RMCR - Adecia Signal Conference Processor (RM-CR)

YAMAHA RMCR - Adecia Signal Conference Processor

SKU:
RM-CR
EAN:
4957812659901
  • Type Processor
Description

RM-CR

Remote Conference Processor

Features:
  • Standard network audio support for "Dante"; all compatible devices can be connected with single network cable
  • Automatically recognizes connected devices on the same network for audio routing
  • Equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment
  • Equipped with the Auto Mixer functions that automatically mix the audio of all connected microphones
  • Equipped with various Input/Output connections such as USB, VoIP,, analog, and Bluetooth


Specifications:

  • Dimensions W215 mm × D260 mm × H44 mm
  • Weight 1.6 kg
  • Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48 V
  • Power consumption (max) 15.0 W
  • Connector RJ 45, USB, XLR balanced, RCA
  • In Operation Temperature 0~40 ℃
  • Humidity 30 %~90 % (No condensation)
  • Storage Temperature -20~60 ℃
  • Humidity 20 %~90 % (No condensation)
  • Indicator Power Indicator, Status Indicator, Bluetooth Indicator, Network Port Indicator (x3)
  • Mount Table Mount, Rack Mount
  • Maximum Device Number with RM-CR -
  • Accessories Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel
  • Options RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit
  • Network Specifications
  • Ether1 Dante Audio/Dante Control, Remote Control, WebUI, PoE+
  • Ether2/Ether3 Corporate Network, Remote Control, SIP, WebUI
  • USB USB2.0, Network Class, WebUI, Fixed IP
  • Audio Specifications
  • Audio I/O Dante 16in/16out
  • USB USB2.0, Audio Class 1.0, Input: 2 ch, Output: 2 ch @48 kHz
  • Mic Input XLR balanced, Input 2 ch
  • AUX RCA unbalanced (Line Level), Input: 2 ch, Output: 2 ch
  • Speaker Out RCA unbalanced (Line Level), Output: 2 ch
  • Bluetooth Version Bluetooth 4.2
  • Supported Profiles HFP (1.6), A2DP, AVRCP
  • Supported Codec CVSD, SBC, mSBC
  • Wireless Output Class2
  • Maximum Communication Distance 10 m (32.8 ft) (no obstacles)
  • Radio Frequency (Operational Frequency) 2,402 to 2,480 MHz
  • Maximum Output Power (EIRP) 4.0 dBm (2.5 mW)
  • SIP Call Handling Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured)
  • Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user
  • Codecs G.711, G.722HD, G.729ab, G.726
  • DTMF Support RTP event, SIP in-band, SIP info package
  • Security SRTP Support (RFC 1889), IETF SIP support(RFC 3261 and companion RFCs)
  • Sampling Rate 48 kHz
  • Bit Depth 24 bit
  • Latency 8 [ms] (Dante In to USB Out, includes signal processing)
  • Frequency Response 20 Hz – 20 kHz

We do our best to ensure that this site contains only correct and accurate information. However, as the product range is constantly changing and expanding, we cannot guarantee the accuracy and completeness of the information. Product images are illustrative and do not necessarily contain a complete description of the product features. If in doubt, send an email to sales ( kauppa@ilonait.fi ) or the front page message tool before ordering the product.